cover3.jpg
r5.png
r10.png
r2.png
r3.png
r4.png
r6.png

Titan x TBRC Spec Racing Wing

$24.99

With great collaboration and input from the world renowned TBRC Wings, we are proud to present the 3D printed Spec Racing Wing. You can expect the same great handling and high maneuverability as the foam versions with the added ability to print, customize and rebuild to your heart’s desire. The wingtips are specifically designed to improve performance by TBRC’s Anthony Lloyd Watton, inspired by the shape of a whale tail. Simplicity and ease of assembly were paramount during the design process. It’s printable on smaller printers, and boasts a relatively small part count and print time compared to our other offerings. The wings are also removable for transport or easy swapping at the field. While not competition legal, we hope the rules will allow fully printed airframes in the future. (Update: These are now competition legal!)

Download the user manual here

Add To Cart

Titan x TBRC Spec Racing Wing

$24.99

With great collaboration and input from the world renowned TBRC Wings, we are proud to present the 3D printed Spec Racing Wing. You can expect the same great handling and high maneuverability as the foam versions with the added ability to print, customize and rebuild to your heart’s desire. The wingtips are specifically designed to improve performance by TBRC’s Anthony Lloyd Watton, inspired by the shape of a whale tail. Simplicity and ease of assembly were paramount during the design process. It’s printable on smaller printers, and boasts a relatively small part count and print time compared to our other offerings. The wings are also removable for transport or easy swapping at the field. While not competition legal, we hope the rules will allow fully printed airframes in the future. (Update: These are now competition legal!)

Download the user manual here

Add To Cart

Included with the files: Support for TBS / ELRS antenna as well as VTX antenna. An FC/GPS can easily be floor mounted as seen below

Spars needed: 

  • (1) 8x400mm (wing spar) 

  • (2) 8x400mm (leading edge support) 

  • (2) 3x400mm (elevon hinge) 

Recommended motor & prop: 

  • 16-19mm mounting pattern 

  • Cobra CP-2210 2200kv
    T-Motor AT2310 2200kv
    Turnigy D2826-6 2200kv

  • 6-8 inch propeller (can also use 7x4/5/6 or up to 9), use of folding propeller strongly encouraged 

Recommended electronics: 

  • TBS crossfire / ELRS 

  • 5.8ghz / 1.2ghz analog or digital  (19x19 camera)

  • Matek F405-WTE flight controller or similar (optional)

  • Matek M8Q-5883 GPS/Compass or similar (optional)

  • 35a BLHeli ESC

  • (2) Emax ES08MAII servos 

  • Battery: 3s 2200mah Lipo or 4S1P 21700 4200mah Li-ion

Misc: 

  • Polymaker Polylite prefoamed LWPLA 

  • Polycarbonate or other high-temp filament for the motor mount 

  • Medium CA glue 

  • 250x210x210 minimum size print bed (works with Prusa Mk3) 

  • Control horns (this one). 

  • M3 threaded inserts (max 6mm height) 

  • M3 bolts of various sizes 

  • 6x3mm magnets

Additional info

  • Feel free to experiment with motors/props and CG location. The wing is very versatile

  • Recommended infill is 4% cubic subdivision with a single wall. The motor mount and wingtip can be printed with 2 walls and higher infill

  • Aim for an AUW under 1kg for best performance

Licensed under the Creative Commons - Attribution - Non-Commercial license. No commercial use without written permission.