r15.png
gopro.png
r1.png
r16.png
r4.png
r5.png
r12.png

Titan Gemini

$24.99

The Titan Gemini was designed to be the ultimate 3D-Printable Flying Wing / Plank. Featuring a 960mm wingspan with spacious wing bays along with a sleek blended fuselage, the Gemini succeeds at both high-speed aerobatic flight as well as long range cruising. It completed over 100km on its maiden flight and has been test flown nearly 500km prior to release. Gemini was carefully crafted in CFD to have flight characteristics that are surprisingly docile while also giving the pilot a confidence inspiring point-and-shoot “locked-in” FPV experience. The nose is fully modular and supports mounting of all commonly used FPV video systems such as GoPro, Analog, DJI, Walksnail, and HDZero. The FPV camera and/or pan-tilt setup can also be mounted to the front canopy allowing for endless combinations to meet your exact needs. The wings are removable for transport making it compact and easy to travel with. Everything you could want from a plank, Gemini delivers!

Download the user manual here

Add To Cart

Titan Gemini

$24.99

The Titan Gemini was designed to be the ultimate 3D-Printable Flying Wing / Plank. Featuring a 960mm wingspan with spacious wing bays along with a sleek blended fuselage, the Gemini succeeds at both high-speed aerobatic flight as well as long range cruising. It completed over 100km on its maiden flight and has been test flown nearly 500km prior to release. Gemini was carefully crafted in CFD to have flight characteristics that are surprisingly docile while also giving the pilot a confidence inspiring point-and-shoot “locked-in” FPV experience. The nose is fully modular and supports mounting of all commonly used FPV video systems such as GoPro, Analog, DJI, Walksnail, and HDZero. The FPV camera and/or pan-tilt setup can also be mounted to the front canopy allowing for endless combinations to meet your exact needs. The wings are removable for transport making it compact and easy to travel with. Everything you could want from a plank, Gemini delivers!

Download the user manual here

Add To Cart

Nose options include support for GoPro, Analog, DJI, Walksnail, HDZero, pitot tube and more! A blank nose is also included for modders

Front canopy options allow for mounting your FPV camera (analog or digital) or pan/tilt setup

Ultra sleek blended lifting body design minimizes drag and allows Gemini to slip through the air effortlessly like a hot knife through butter

Fits a 4S4P 18650 14000mah Li-Ion battery with ease and features FULL size wing bays for mounting your rx and vtx with great antenna separation.

Low drag NACA ducts provide ample ventilation for warm components inside the fuselage

Structural rigidity is top notch - with carbon tubes insuring minimal if not zero flex during high G aerobatics

ExpressLRS Gemini Support

Included in the files is a fuse3 section which supports ExpressLRS Gemini. This is the first official aircraft

that natively supports ELRS Gemini with easy mounting options for both antennas.

Gemini is a ground-breaking innovation for ELRS - enhancing reliability, stability, and range beyond

the standard ELRS with dual transceivers on both ends.

Read more about ELRS Gemini here: https://www.expresslrs.org/software/gemini/

Licensed under the Creative Commons - Attribution - Non-Commercial license. No distribution or commercial use without permission.